Transport And Assembly; Maintenance And Disposal - Steelcase Truchet Guía Rápida

■
Fastening elements (grids) made of wire ropes and Gripple wire joiners
5. Use
Truchet Acoustic Tiles may only be used in a technically perfect condition and in compliance with the
Quick Reference Guide.
Truchet Acoustic Tiles are used to optimise room acoustics.
Before using the Truchet Acoustic Tiles, ensure that:
The product was assembled in accordance with the accompanying assembly instructions.


6. Transport and assembly

Check the delivery contents:
After unpacking, check the Truchet Acoustic Tiles immediately for damage sustained during
transportation and for completeness; inform the manufacturer of any damage as soon as possible.
Assembling the Truchet Acoustic Tiles:
Please follow the accompanying assembly instructions for the assembly of the sound absorbing tiles.

7. Maintenance and disposal

Functional check:
Interval Inspection point
EN
Regularly Fastening elements
for the Truchet
Acoustic Tiles
Regularly Surfaces of the
Truchet Acoustic
Tiles
Cleaning and care:
Remove dust and dirt from the tiles periodically.

Check the fastening elements and tiles for damage and cracks.

Follow the manufacturer's care instructions for the fabric covering:

http://www.gabriel.dk/en/fabrics/textile/Hush/40288
Disposal
:
Disassembly should only be realised by skilled and qualified personnel. If you want to disassemble and dis-
pose of the Truchet Acoustic Tiles permanently, proceed as follows:
Disassemble the tiles and the fastening to the wall or ceiling.

152784
Functional Required condition
check
Fastening All screws and
fastening elements are
tight / fixed
Soiling; damage The surface is free
from soiling and
damage
T r u c h e t A c o u s t i c T i l e s
Measure (if
required)
Re-tighten screws
/ fix fastening
elements
Clean the surface
as stated under
the section
"Cleaning and
care", or have it
replaced by the
Steelcase
Customer Service
Department
Rev. A