G E N E R A L
DESCRIPTION OF APPLIANCE AND ACCESSORIES
Thermostat
b Power selector switch
c Motor unit and air outlet grid (front)
APPLIANCE A/B
• Power selector switch
POSITION
• Room thermostat
The thermostat maintains the desired temperature: once reached, the appliance automatically turns off and will turn on again as soon as
the temperature level drops.
POSITION
MAX
I N S T R U C T I O N S
Fan heater function
- Turn the power selector switch as seen below according to the desired type of heating:
position
: ECO heating;
position
: Rapid heating.
- Regulate the thermostat depending on the temperature you wish to maintain.
Cool air facility
- Turn the thermostat to the maximum temperature MAX.
- Turn the power selector switch to position
ntifreeze function
This function maintains the room temperature at +5°C.
When the temperature drops below this level, the fan heater turns on automatically.
- Turn the thermostat to the antifreeze setting .
- Turn the power selector switch as follows:
position
to gradually increase the temperature by +5°C.
position
to quickly increase the temperature by +5°C.
USEFUL ADVICE
Whenever you put the fan heater away, make sure that it is protected from dust, to prevent it from entering through the grids.
I N S T R U C T I O N S
FUNCTION
Appliance off
Cool air
Warm air with Eco function
Rapid heating
FUNCTION
Antifreeze
Maximum temperature
.
d Air inlet grid
F O R
5
U S E
E
N
G
L
I
S
H