Description Of The Appliance And Its Accessories - Imetec L4801 Instrucciones Para El Uso

• neVeR immerse the appliance in water and never place it under running
water.
• do not use the appliance near a washbasin full of water. during use, the
appliance must be placed in such a way that it cannot fall in the washbasin.
• do not place the appliance in the immediate vicinity of curtains or exposed
fabrics.

DEsCRIPTION OF ThE APPLIANCE AND ITs ACCEssORIEs

Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. Room thermostat
2. Ioniser warning light
(Only for model M2-200 - Type L4802)
For the appliance features, refer to the external packaging.
Use only the supplied accessories.
• Unpack the product.
• Check that it is intact and not damaged.
• Pull the cable from the cable reel at the bottom.
• Connect the product to the domestic mains.
Fan heater function
• Turn the power switch (4) to cold air position
• Turn the power switch (4) to hot air position
• Turn the power switch (4) to very hot air position
• Switch the appliance off by turning the power switch (4) to off
summer ventilation function
• Turn the room thermostat (1) to the MAX maximum temperature.
• Turn the power switch (4) to cold air position
anti-freeze function
This function assures maintaining the room temperature at around +5°C. The fan heater
turns on automatically as soon as the temperature falls below this value.
sYMBoLs
Warning
Prohibited
Do not cover
Appliance OFF
PREPARATION
Cold air
Hot air (1100 W)
Very hot air (2200 W)
Note/Information
3. Operation warning light
4. Power switch
5. Technical data
UsE
.
.
.
.
.
EN
7