Description Of The Appliance And Its Accessories - Imetec M0601 Instrucciones De Uso

• Use the appliance only with the supplied accessories that are an essential
part of the appliance.
• DO NOT use extension cords or adaptors .

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1. rear air inlet grid
2. Motor casing and air outled grid
3. room thermostat
• Unpack the product.
• Check that it is intact and not damaged.
• Connect the product to the domestic mains.
WARNING! This appliance is not to be used if it has been dropped
or if there are visible signs of damage.
• For fan operation, move the power switch (4) to the cool air position and adjust the ambient
thermostat (3) to the maximum temperature.
• For gradual heating, move the power switch (4) to the Hot air position with ECO function and
adjust the ambient thermostat (3) to the required temperature.
• For quick heating, move the power switch (4) to the rapid heating position and set the ambient
thermostat (3) on the required temperature.
• To switch the appliance off, turn the power switch (4) to off.
SYMBOLS
Warning
Prohibited
Do not cover
Appliance OFF
Cool air
PREPARATION
Hot air with Eco function
Rapid heating
Anti-freeze
Max temperature
Note
4. Power switch
5. Technical data
USE
EN
11