Tabla de contenido
Publicidad
O
x 2
I
FIG. 8
8. Glue Base (C) to the Left and Right Front Legs (H&I). The Cam Connectors must be toward the
top. The Legs must be tight against the Base. Fasten in place with a #6x3/4" P.O. Screw (O)
through the predrilled hole in each leg.
ZG
x 4
FIG. 9
9. Insert the Rafix Bolts in the Front Legs into the Rafix Cams (ZB) in the front edge of the Sides and
the Cam Connectors in the base into the Bottom Shelf. Tighten the Rafix Cams through the holes
in the bottom of the Cams. Insert the Cam Housings (ZG) over the Cam Connectors and tighten.
Page 8 — 743Wa — Rev. 2/08
Stain Test Area
C
ZB
ZG
ZG
C
ZG
ZG
H
O
FIG. 8A
ZB
H
Publicidad
Tabla de contenido
