Electrical Supply; Steps For Installation; Technical Data; Installation Notes - Fulgor Milano F1SP24 1 Serie Instrucciones De Installación

STEPS FOR INSTALLATION

The following pages provide the necessary information for
proper installation of the oven and are arranged as follows:

Technical Data

STEPS FOR INSTALLATION
Installation Cutout Dimensions, Required Clearances and
The following pages provide the necessary information for Mounting instructions for:
proper installation of the oven and are arranged as follows: - Under counter Installation, Single Oven
- Wall Installation, Single Oven
Technical Data
Installation Cutout Dimensions, Required Clearances and
Mounting instructions for:
TECHNICAL DATA
- Under counter Installation, Single Oven
For cutout dimensions see following section titled:
- Wall Installation, Single Oven
Preparing location
SINGLE OVEN
TECHNICAL DATA
For cutout dimensions see following section titled:
F1SP24*1
Preparing location
SINGLE OVEN

INSTALLATION NOTES

F1SP30*1
1. Do not slide oven across floor. Damage to floor covering
or floor could result.
2. The oven support surface must be a minimum 3/4" (2cm)
INSTALLATION NOTES
thick plywood platform.
For single ovens, it must support 202 pounds.
1. Do not slide oven across floor. Damage to floor covering
The platform must be solid, level and flush with the bottom of
or floor could result.
the cabinet cut out.
2. The oven support surface must be a minimum 3/4" (2cm)
3. Use extreme caution when moving or installing the oven.
thick plywood platform.
It is very heavy.
For single ovens, it must support 202 pounds.
DO NOT LIFT THE OVEN BY THE DOOR HANDLE,
The platform must be solid, level and flush with the bottom of
remove the door for easier handling and installing.
the cabinet cut out.
See REMOVING THE DOOR in the maintenance section
3. Use extreme caution when moving or installing the oven.
of the Operating Instructions.
It is very heavy.
4. Be very careful when moving or installing the oven to
DO NOT LIFT THE OVEN BY THE DOOR HANDLE,
avoid damage to the oven frame or damage to the cabinets.
remove the door for easier handling and installing.
5. Be sure to level the oven. An oven that is not level may
See REMOVING THE DOOR in the maintenance section
provide poor or inconsistent baking results.
of the Operating Instructions.
6. Be careful when placing oven. DO NOT pinch the conduit
4. Be very careful when moving or installing the oven to
between the oven back.
avoid damage to the oven frame or damage to the cabinets.
5. Be sure to level the oven. An oven that is not level may
provide poor or inconsistent baking results.
6. Be careful when placing oven. DO NOT pinch the conduit
between the oven back.
Ltr. DIMENSION
A Cutout Width
Ltr. DIMENSION
Ltr. DIMENSION
B Cutout Depth
A Cutout Width
C Cutout Height
A Cutout Width
B Cutout Depth
D Oven Position (distance from floor)
B Cutout Depth
C Cutout Height
E Minimum Spacing
C Cutout Height
D Oven Position (distance from floor)
D Oven Position (distance from floor)
E Minimum Spacing
E Minimum Spacing
4
Electrical Supply and Wiring Requirements, Programming
required if connecting to 120V/208V Circuit. Electrical
Connections for 3-wire or 4-wire Branch Circuit.
Final Checklist
Electrical Supply and Wiring Requirements, Programming
required if connecting to 120V/208V Circuit. Electrical
Connections for 3-wire or 4-wire Branch Circuit.
Final Checklist
Electrical Ratings and Maximum Connected Load
@ 120V/240V 60Hz
Amperes kW
Electrical Ratings and Maximum Connected Load
11.2 2.60
@ 120V/240V 60Hz
Amperes kW
16.2 3.80
Before installing or removing, turn power OFF at the service
panel. Lock service panel to prevent power from being turned
ON accidentally.
Securely fasten oven to cabinet using the screws provided.
Failure to do so could result in oven moving or tipping
Before installing or removing, turn power OFF at the service
during use and causing damage to the oven or cabinets or
panel. Lock service panel to prevent power from being turned
personal injury.
ON accidentally.
Securely fasten oven to cabinet using the screws provided.
Failure to do so could result in oven moving or tipping
Know how to disconnect the power to the oven at the circuit
during use and causing damage to the oven or cabinets or
breaker or fuse box in case of an emergency.
personal injury.
Know how to disconnect the power to the oven at the circuit
breaker or fuse box in case of an emergency.
Unit is heavy and requires at least two people or proper
equipment to move.
Unit is heavy and requires at least two people or proper
equipment to move.
Do not remodel the oven.
Do not remodel the oven.
24"
22 1/16"
(56 cm)
24"
(61 cm)
23"
(58,5 cm)
34"
(86,5 cm)
1/2"
(1,3 cm)
Installation Manual
ENGLISH
@ 120V/208V 60Hz
Amperes
12.9
@ 120V/208V 60Hz
Amperes
17.9
WARNING
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
SINGLE
30"
28 7/16"
(72,2 cm)
SINGLE
SINGLE
24"
30"
(61 cm)
30"
27 3/8" 28"
28 7/16"
(71 cm)
(69,5 cm)
(72,2 cm)
24"
34"
24"
(61 cm)
(86,5 cm)
(61 cm)
23"
1/2"
27 3/8"
(58,5 cm)
(1,3 cm) min
(69,5 cm)
34"
34"
(86,5 cm)
(86,5 cm)
1/2"
1/2"
(1,3 cm) min
(1,3 cm) min
ENGLISH
ENGLISH
kW
2.62
kW
3.65