Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL.HOOD
1. Flip hood cover down. Remove panel
by unscrewing thumb screw. Remove
grease filter and charcoal filter.
Fig. 13.
2. Separate the hood parts:
a. Remove the control box connec-
tor. Fig. 14.
b. Remove the lighting connector.
Fig. 14.
c. Remove the sensor box from the
mount. Fig. 14.
3. Separate the hood body from the
blower frame by unscrewing the
six (6) mounting screws (Fig. 15).
Remove the blower frame from the
shipping board.
4. Mount the hood frame to the wall us-
ing six (6) M5 x 38 Pan Head Screws.
Fig. 16. Make sure all screws are in
wood.
5. For ducted applications install the
damper onto the blower. Complete
the duct work. Plug power cord into
receptacle.
KNOB
PANEL
COVER
FIG.13
- 10 -
CONTROL
BOX
MOUNTING
SCREWS. (6)
HOOD
FRAME
M8. x. 38.
PAN. HEAD
SCREWS. (6)
LIGHTING
CONNECTOR
SENSOR.
BOX
FIG.. 14
HOOD
BODY
FIG.. 15
FIG.. 16
Publicidad
Tabla de contenido
