Environmental Protection - Ratio PRO XF20-C Manual De Instrucciones

Excessive blade force may reduce the life of the
blade or damage the motor. To reduce heat during
metal cutting, add a little lubricant along the cutting
line.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0°C-45°C.
The recommended ambient temperature range
for the charging system during charging is
0°C-40°C.
TROUBLESHOOTING
Symp-
Possible Causes Possible Solution
tom
Overload
The tool
sudden-
Battery tempera-
ly stops
ture too high
during
opera-
tion.
Low battery
capacity
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling advice.
Relieve the load
on the machine
immediately and
allow cooling for
approx. 30 sec-
onds by running
the machine on
no-load.
Charge the bat-
tery pack.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 12
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1.Misuse, abuse or neglect.
2. The tool has not been used for rental
purposes.
3.Repairs attempted by unauthorised repair
centres.
4.Damage caused by foreign objects, substances
or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est 08740
Sant Andreu de la Barca Barcelona-España
43