Sauder 413045 Manual Del Usuario página 13

9 9
Carefully turn your unit over onto its front edges. Unfold the BACK (I) and lay it over your unit.
Make equal margins along all four edges of the BACK (I). Push on opposite corners of your unit if needed to make it "square".
Fasten the BACK (I) to your unit using the NAILS (HH).
NOTE: Be sure to tap NAILS into the holes that line up over the UPRIGHTS (C and D) and SHELF (G).
NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed.
Push the FOOT (X) into the hole in the BOTTOM (F).
413045
These holes must line up over
the UPRIGHTS and SHELF.
F
X
www.sauder.com/services
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
(42 used in this step)
I
HH
NAIL
Page 13