Tabla de contenido
Publicidad
13
13
Z
(8 used)
AA
K
Carefully stand your unit upright.
To insert the drawers into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on the unit.
Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawers, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed adjustments, and
tighten the SCREWS.
Push the RUBBER SLEEVES (AA) over the remaining METAL PINS (Z). Insert the METAL PINS into the hole locations of your
choice in the ENDS (A and B) and LARGE UPRIGHT (C). Set the ADJUSTABLE SHELVES (H) onto the METAL PINS.
413045
B
H
Place the roller on the SLIDE
behind the roller on the RAIL.
www.sauder.com/services
C
H
J
A
Page 17
Publicidad
Tabla de contenido
