Publicidad
Idiomas disponibles
Idiomas disponibles
C3
pop out a wiring access slug.
C3
Slide the mounting rails into brackets.
C5
Mark position of screws by using holes as a template.
42936-01 10/17/2007
OR
C4
5/8
1/2
Using the depth markings on the housing, position the
bottom edge of the housing so that it will be flush with
C6
Drill a pilot hole at the TOp of each outline, AS SHOWN.
10
the sheetrock.
1/16" bit
5/8
1/2
Publicidad
