Hunter 82040 Manual Del Usuario página 7

A6
Connect 4" duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
Section B - New Construction – suspended between joists
B1
pop out a wiring access slug.
B2
Slide the mounting rails into brackets. Note the orienta-
tion of of the outer ends of the rails.
Section E -
Final Installation
on page 14.
OR
B3
5/8
1/2
position the correct depth mark at the bottom edge of
the joist based upon the the thickness of your sheetrock.
7
Go to
42936-01 10/17/2007
5/8
1/2