Hunter 82040 Manual Del Usuario página 13

D5
Install the wiring and the strain relief into the wiring
access hole you made earlier.
D7
Move the housing into the ceiling.
D9
Screw mounting screws into joist or framing.
D6
Connect 4" duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
D8
5/8
1/2
position the bottom edge of the housing flush with the
Section E -
Final Installation
on page 14.
13
5/8
1/2
sheetrock.
Go to
42936-01 10/17/2007