Nice Mindy A824 Instrucciones Y Advertencias Para El Instalador página 31

6.5) MANUAL SEARCH FOR DISTANCE "A":
With this procedure you carry out the "manual search for distance "A", in other words, you programme the stopping point in
opening.
Distance "A" can coincide with distance "1", but to avoid the gate bumping each time against the mechanical stop we
recommend leaving a margin of a few inches.
As distance "A" is defined in both motors, dip switch configuration will vary according to the motor wanted.
1) Set the dip switches selecting first one motor and then the other in the following way:
1 2 3 4 5 6 7 8 9 10
Motor no.1
2) Press the OPEN or CLOSE key (and the <<>> key to increase motor speed) until the distance wanted is reached in both
motors.
☞
OPEN
☞
☞
CLOSE
3) Once the distance wanted is reached first for one motor and then for the other, carry out the "Memorising procedure" Chap.
6.1
6.6) MANUAL SEARCH FOR THE DISTANCE "1":
With this procedure you carry out the "manual search for distance "1", in other words, you programme the maximum opening
point.
As distance "1" is defined in both motors, dip switch configuration will vary according to the motor wanted.
1) Set the dip switches selecting first one motor and then the other in the following way:
1 2 3 4 5 6 7 8 9 10
Motor no.1
2) Press the OPEN or CLOSE key (and the <<>> key to increase motor speed) until the distance wanted is reached in both
motors.
☞
☞
☞
3) Once the distance wanted is reached first for one motor and then for the other, carry out the "Memorising procedure"
Chap. 6.1
11 12 1 2 3 4 5 6 7 8 9 10
11 12 1 2 3 4 5 6 7 8 9 10
11 12
Motor no.2
11 12
Motor no.2
GB
31