Sauder New Grange 419142 Manual Del Usuario página 21

Step 16
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D12 and D13).
å
Fasten a DRAWER RIGHT (40CC) to the DRAWER RIGHT SIDE (D12)
å
and DRAWER LEFT (40CD) to the DRAWER LEFT SIDE (D13). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten a PULL (128K) to the DRAWER FRONT (T). Use two SILVER 1/4"
å
MACHINE SCREWS (61S) and two WASHERS (10I).
Repeat this step for the other drawer.
å
3
4
SILVER 1/4" MACHINE SCREW
(4 used for the PULLS)
www.sauder.com/services
Roller end
1
2
128K
61S
GOLD 5/16" FLAT HEAD SCREW
10A
10I
D13
T
(4 screws per drawer)
3S
(8 used in this step)
419142
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D12
2
3
4
Roller end
1
Page 21