Bottom - Sauder New Grange 419142 Manual Del Usuario

Step 10
Fasten four LARGE METAL BRACKETS (2G) to the BOTTOM (H). Use four BLACK
å
9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the BRACKETS are even with the edge of the BOTTOM.
å
Fasten two METAL BRACKETS (4G) to the ENDS (A and B). Use two BLACK 9/16"
å
LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the BRACKETS are even with the edges of the ENDS.
å
Fasten the BASE MOLDING (Q) to the ENDS (A and B) and BOTTOM (H). Use six
å
BLACK 9/16" LARGE HEAD SCREWS (1S) through the BRACKETS and into the
BASE MOLDING.
B
4G
www.sauder.com/services
Q
H
2G
BLACK 9/16" LARGE HEAD SCREW
4G
419142
1S
(12 used in this step)
A
Page 15