Ending Operation - Dräger FabiusTiro Manual Del Usuario

Operation
Using the external fresh-gas outlet as a common gas outlet (optional)
The following chapters have been changed:
Operation with the compact breathing
system (COSY)
A
Using the external fresh-gas outlet with an additional switch (optional)
The following chapters have been changed:
Operation with the compact breathing
system (COSY)
Before using an automatic ventilation mode
(Volume Control, Pressure Control, Pressure
Support, SIMV/PS) or the ManSpont ventilation
mode:
8
Before using an automatic ventilation mode
(Volume Control, Pressure Control, Pressure
Support, SIMV/PS) or the ManSpont ventilation
mode:
1 Disconnect the non-rebreathing system from
the external fresh-gas outlet.
2 Connect the fresh-gas hose to the external
fresh-gas outlet (A).
3 Screw the sample line back to the Y-piece on
the breathing circuit.

Ending operation

1 Close all flow control valves on the device.
1 Set the switch lever to COSY.
The lever points in the direction of the fresh-
gas inlet.
2 Screw the sample line back to the Y-piece on
the breathing circuit.
Ending operation
1 Close all flow control valves on the device.
Supplement Fabius family SW 3.n