Redial And Pre-Dial - Steren TEL-250 Manual De Instrucciones

Using speaker
1.- Press Line 1 or Line 2 or press speaker key (16). The
message USE appears on LCD screen.
2.- After hearing dial tone, enter the desired number to call.
3.- After fi nishing the conversation, press selected Line key or
press speaker key (16).
If you don't press any Line key to use, you will get the last If you don't press any Line key to use, you will get the last
attended line on which you had the last conversation. attended line on which you had the last conversation.

REDIAL AND PRE-DIAL

RE-DIAL
Pick the handset up and after hearing dial tone, press Rd / Out
(15). Last dialed number appears on LCD screen, automatically
dialing.
PRE-DIAL
1.- With the handset on the base, enter the desired number to
call.
2.- Pick the handset up, after 2 seconds, will be start to auto dial.
3.- After fi nishing the conversation, place the handset on the
base.
If during dialing, you made a mistake, you can correct it If during dialing, you made a mistake, you can correct it
pressing Set / Del (11). pressing Set / Del (11).
MEMORIES
Your phone has 3 quick dial buttons: M1, M2 and M3.
To store a number
1.- With the handset on the base, press the desired memory
button (M1, M2, M3) (6) for 3 seconds. The message ddrn
appears on LCD screen.
2.- Enter desired number to store and press the selected
memory button (6) once again. The number will be stored on that
position.
ENGLISH-6