Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To dial a number stored in memory
1.- Press Line 1 or Line 2 or press speaker key (16) or pick the
handset up.
2.- When hearing dial tone, press the memory button where you
stored the desired number to dial. Automatically dialing.
ANSWERING INCOMING CALLS
When you receive an incoming call, phone start to ring. If you
have caller ID service, then you receive the incoming number,
too.
Using handset:
1.- When the phone rings, pick the handset up and begin the
conversation.
2.- When fi nishing the conversation, place the handset on the
base.
Using speaker:
1.- When the phone rings, press speaker key (16) and begin the
conversation.
2.- When fi nishing the conversation, press speaker key (16) once
again.
To receive the caller ID data correctly, please answer the
To receive the caller ID data correctly, please answer the
phone after thrice rings.
phone after thrice rings.
There should be a 6 seconds gap (minimal) between two
There should be a 6 seconds gap (minimal) between two
calls. Otherwise you cannot receive the caller ID data
calls. Otherwise you cannot receive the caller ID data
correctly.
correctly.
RINGTONE
Your phone set has up to 16 different types of ring tones, to
choose one of them, follow these steps:
1.- Press Line 1 (3) button.
2.- Press Ring (18). A ring tone starts to sound. Use Up / Down
(10) to move over the ring tone list.
3.- Press Ring (18) to confi rm the selection.
You can set a different ring tone for Line 2. Follow preview
You can set a different ring tone for Line 2. Follow preview
steps.
steps.
ENGLISH-7
Publicidad
Tabla de contenido
