Technical Specifications; General Information; Potential Hazards - Buhnen HB 230E Manual De Instrucciones

*HQHUDO ,QIRUPDWLRQ  6DIHW\
1

General Information

1.1

Technical Specifications

Designation
Standard delivery
Dimensions
Weight
Operating voltage
Power consumption
Insulation class
Operating temperature
Control
Glue stick
Adhesive capability
* Depending on temperature and glue viscosity.
1.2 Functional Description
Hot melt glue gun for use with commercially available glue sticks.
2 Safety
2.1 General Information
Only ever use the hot melt glue gun in conjunction with commercially available glue sticks in
accordance with the information under "Technical Specifications".
Only operate the hot melt glue gun once you have familiarized yourself with its operation and are aware
of its potential hazards.
Comply with all locally applicable accident prevention regulations as well as all regulations concerning
safety and occupational medicine.
If the power cord is damaged or cut, immediately unplug the unit from the wall outlet and do not
continue to use it.
Never unplug the unit by pulling on the power cord.
2.2

Potential Hazards

Please observe the following notes carefully in order to avoid injuries and damage to materials!
Burn hazard!
The nozzle (1) and melted glue can reach temperatures in excess of 200°C. Avoid contact and, if
necessary, wear protective gloves.
Odor!
Hot melt adhesives release vapors that may cause odor nuisance. Improper use can, in some cases,
lead to irritation of the mucous membranes. Always ensure adequate ventilation.
Glue gun, tool, spare nozzle, operating instructions
290 x 230 x 70 mm
220 - 240 V, 50 Hz
40 - 230°C, preset to 190°C
Electronic Temperature Regulator
BÜHNEN hot melt adhesive, in stick form, Ø 12 mm
1 to 1.5 kg/hr.*
- 9 -
HB 230E
625 g
300 W
Class I