LEGRAND DAKER DK Plus 5 kVA Manual De Instalación página 69

Total harmonic distortion
of the output voltage
Efficiency
Overload capacity
Number of output phases
Batteries and battery charger characteristics
Number of batteries
Battery type
Unitary capacity
Rated Battery Voltage
Backup time with 50%
linear load
Battery extension
Maximum charge current
Recharge time (to 90%)
Communication and management
Screen and signalling
Communications ports
Software
Protections
5 kVA - 6 kVA - 10 kVA
3 101 73
< 3% at full linear load
< 7% at full non-linear load
up to 94%
101%-105% continuous
106%-120% for 600-30 seconds (linear decrease)
126%-150% for 30-0.16 seconds (linear decrease)
Single phase
Lead-acid sealed without maintenance (VRLA)
12 Vdc - 5 Ah
240 Vdc
> 5 min
4 hours
six pushbuttons and five LEDs for
real-time control of the status and
the main parameters of the UPS
RS232 and USB
Connector for network interface
Software for Windows and Linux
environments is available in order to:
- displaying all the functioning and
diagnostic data in case of problems;
- setup of special functions.
Download a copy free of charge from the
website http://www.ups.legrand.com
Electronic circuits against overloads
and short-circuit
Backfeed
Emergency Power Off (EPO)
Overtemperature
DAKER DK Plus
3 101 74
20
Yes
1.86 A
69