When carrying out scheduled maintenance, if it is necessary
to disassemble the skimmer basket, apply pressure to the rel-
evant area in order to unhook the vessel; therefore disassemble
it pushing downwards.
2
4
3
1
2
1
Maintenance of thermal cover
Fabric
Remove the cover from the support frame and lay it on a
straight surface.
Dampen the fabric with clean water.
Evenly spread a diluted solution of neutral soap on the surface.
Let the solution stand for 2-3 minutes, depending on the
degree of dirtiness.
Clean the cover with a soft brush.
To remove all soap residue, rinse with plenty of clean water.
In case of heavy incrustation, repeat the operation.
If necessary, perform the steps above on the back side as well.
Let the cover dry. Then place it on its support until it is per-
fectly dry.
Leatherette
Use a neutral cleaner, then rinse with clean water.
If necessary, use a specific product after cleaning to restore
and maintain the material's shine.
27