Publicidad
Step 12
Insert four METAL PINS (JJ) into the ends of the DIVIDER (D451).
å
Insert the METAL PINS (JJ) in one end of the DRAWER DIVIDER (D451)
å
into the holes in the SMALL DRAWER FRONT (L2).
Fasten the SMALL DRAWER BACK (D450) to the SMALL DRAWER
å
SIDES (D245 and D271) and DRAWER BRACE (M64). Use five BLACK
1-9/16" FLAT HEAD SCREWS. (30S).
NOTE: Be sure the METAL PINS in the DRAWER DIVIDER insert into
å
the SMALL DRAWER BACK.
D245
www.sauder.com/services
JJ
Finished edge
(4 used)
L2
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
D271
D451
M64
401291
D450
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
Page 17
Publicidad
