Steren COM-822 Manual Del Usuario página 43

SECURITY
There are 4 submenus:
Firewall, IP Filtering,
Domain Filtering y MAC Filtering,
FIREWALL
The default setting for the switch is off. When the general firewall
switch is off, even if IP Address Filtering, DNS Filtering and MAC
Filtering are enabled, their settings are ineffective.
Enable Firewall - the general firewall switch is on or off.
Enable IP Address Filtering - set IP Address Filtering is enabled or
disabled. There are two default filtering rules of IP Address Filtering,
either Allow or Deny passing through the router.
Enable Domain Filtering - set Domain Filtering is enabled or disabled.
Enable MAC Filtering - set MAC Address Filtering is enabled or
disabled. You can select the default filtering rules of MAC Address
Filtering, either Allow or Deny accessing the router.
ENGLISH-43