Steren COM-822 Manual Del Usuario página 59

2. How do I configure the router to access Internet by Ethernet
users?
1) Login to the router, click the "Network" menu on the left of your
browser, and click "WAN" submenu. On the WAN page, select
"Dynamic IP" for "WAN Connection Type", finish by clicking "Save".
2) Some ISPs require that you register the MAC Address of your
adapter, which is connected to your cable/DSL Modem during installa-
tion. If your ISP requires MAC register, login to the router and click the
"Network" menu link on the left of your browser, and then click "MAC
Clone" submenu link. On the "MAC Clone" page, if your PC's MAC
address is proper MAC address, click the "Clone MAC Address"
button and your PC's MAC address will fill in the "WAN MAC Address"
field. Or else, type the MAC Address into the "WAN MAC Address"
field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then
click the "Save" button. It will take effect after rebooting.
3. I want to use Netmeeting, what do I need to do?
1) If you start Netmeeting as a sponsor, you don't need to do anything
with the router.
2) If you start as a response, you need to configure Virtual Server or
DMZ Host.
3) How to configure Virtual Server: Login to the router, click the
"Forwarding" menu on the left of your browser, and click "Virtual
Servers" submenu. On the "Virtual Server" page, click Add New, then
on the "Add or Modify a Virtual Server" page, enter "1720" for the
"Service Port" blank, and your IP address for the "IP Address" blank,
taking 192.168.1.169 for an example, remember to "Enable" and
"Save".
ENGLISH-59