Mac Filtering - Steren COM-822 Manual Del Usuario

MAC FILTERING

The MAC Address Filtering feature allows you to control access to the
Internet by users on your local network based on their MAC
addresses.
MAC Address - .This is the PC'S MAC address which is controlled
by the rule. Its format is XX-XX-XX-XX-XX-XX (X is any hexadecimal
digit). For example: 00-0E-AE-B0-00-0B.
Description - This is the description about the PC, Fox example:
John's PC.
Status - This field displays the status, Enabled means the rule is
effective, Disabled means the rule is ineffective.
Antes de utilizar su nuevo Kit C
Before adding a MAC Address Filtering entry, you should enable
the Firewall and the MAC Address Filtering function first
Fox example: If you want to block the PCs with MAC addresses
00-0A-EB-00-07-BE and 00-0A-EB-00-07-5F to access the Internet,
you can configure as follows.
1. Enable the "Firewall" and "MAC Address Filtering" on the Firewall
screen
2.- And then specify the Default MAC Address Filtering Rule as "Deny
these PCs with enabled rules to access the Internet".
3. Click Add New.../Modify you will see the following screen.
ENGLISH-48