Factory Defaults - Steren COM-822 Manual Del Usuario

Antes de utilizar su nuevo Kit C
1. This setting will be used for some time-based functions such
as firewall. You must specify your time zone once you login to
the router successfully, otherwise, these functions will not take
effect.
2. The time will be lost if the router is turned off.
3. The router will obtain GMT automatically from Internet if it has
already connected to Internet.
FIRMWARE
You can update the latest version of firmware for the Router on the
following screen.
To update, press the Browse button and select the update file and
finally press the button "Upgrade" to update your computer with the
latest version.

FACTORY DEFAULTS

You can restore the configurations of the Router to factory defaults on
the following screen
Click the Restore button to reset all configuration settings to their
default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
Antes de utilizar su nuevo Kit C
Any settings you have saved will be lost when the default
settings are restored.
ENGLISH-53