System Tools; Time Settings - Steren COM-822 Manual Del Usuario

SYSTEM TOOLS

You can see the submenus under
the main menu: Time Settings,
Firmware, Factory Defaults,
Backup & Restore, Reboot,
Password, System Log, Remote
Management and Statistics. Click
any of them, and you will be able
to configure the corresponding
function. The detailed
explanations for each submenu
are provided below.

TIME SETTINGS

You can configure the time on the following screen.
Time Zone - Select your local time zone from this pull down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
NTP Server Prior - Enter the address for the NTP Server, then the
Router will get the time from the NTP Server preferentially. In
addition, the Router built-in some common NTP Servers, so it can get
time automatically once it connects the Internet.
To configure the system manually:
1. Select your local time zone.
2. Enter date and time in the right blanks.
3. Click Save to save the configuration.
To configure the system automatically:
1. Select your local time zone.
2. Enter the IP address for NTP Server Prior.
3. Click the Get GMT button to get system time from Internet if you
have connected to the Internet.
ENGLISH-52