Keypad Tones - Motorola TALKABOUT T47X Serie Manual De Instrucciones

1. Press Menu/Lock until
flashes.
2. Press or to select the channel, then press
3. Press or to select the code.
4. Press the PTT button or wait until the time out to activate
Dual Watch. The screen alternates between Home
Channel and Dual Watch Channel.
5. To end Dual Watch mode, Press
If you set the same channel and code as
Note:
current channel, Dual Watch does not work.
TM
VibraCall Alert
TM
VibraCall is a vibrating alert that notifies you that
your radio is receiving a message. This is useful in
noisy environments. The Vibrate Alert is triggered
when you received a call. It is triggered again if
there is no activity within 30 seconds after the
previous call.
1. To turn vibrating alerts on, press
until is displayed. The current setting flashes.
2. Press or to change the setting to On/Off.
3. Press the PTT button to confirm and exit Menu or
Menu/Lock button to continue set up.
appears. The
.
icon.
Menu/Lock button

Keypad Tones

You may enable or disable the speaker key tones.
You hear the key tone each time a button is pushed.
1. Press Menu/Lock button until
current setting On/Off flashes.
2. Press either or to turn On or Off.
3. Press the PTT button to confirm and exit Menu or
Menu/Lock button to continue set up.
When the keypad tone feature is off, the
Note:
following are not disabled:
• Transmit timeout alert tone
• Call tone
• Low battery alert tone or
• The transmitted talk confirmation tone
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone
when you finish transmitting. It is like saying "Roger"
or "Over" to let others know you are finished talking.
1. Press Menu/Lock button until the
current setting On/Off flashes.
2. Press or to turn On or Off.
3. Press the PTT button to set and exit Menu or
continue set up.
appears. The
appears. The
to
17