For End Code 3 (Tumbling) - Milnor 30022 Serie Guía Del Operario

Chapter 2. Normal Machine Operation

For End Code 3 (Tumbling)

2.1.7.2.
remove some of the goods, then close the door and resume tumbling to loosen more goods from
the basket.
Display or Action
When the basket stops turning, open the door and remove some or all of the goods from the
machine.
Remove any desired portion of the load.
PELLERIN MILNOR CORPORATION
—End code 3 (Tumbling) allows you to open the door and
Explanation
Remove power from the 3-wire circuit, silence the operator
l
signal, and stop any basket motion in progress. This button also
unlocks the door so you can open it.
Open the door for unloading.
l+d
Close the door.
D+l
Resumes the tumbling action without the operator signal.
1
Tumbling continues for another two minutes, or until you press
.
l
— End of BICWCO03 —
22