Connecting To The Kenwood World App; Using Your All In One Cooker; Lid Off Cooking; Using Preset Programmes - Kenwood CCL50 Manual De Instrucciones

Connecting To The
Kenwood World App
Refer to Illustrations
The Kenwood World App will allow you to
control your appliance through your smart
phone or tablet.
1 Plug in and press the On/Off switch at
the rear of the power unit.
2 Select Settings
and follow the instructions on the
display screen.
PIN number
This will be required when prompted
by the Kenwood World App.
The appliance can only be connected
when the PIN Number is shown on the
display screen. If the PIN is entered
incorrectly, follow the instructions on
the app and retry.
To display the unit's PIN number, select
Settings > WiFi > Connect and
follow the instructions on the display
screen (only when connected to WiFi).
Note:
WiFi
Operates with IEEE802.11 b, g and n at 2.4
GHz only, and connects to networks using
WPA2-PSK
Compatibility
Kenwood World App compatible with
latest versions of iOS and Android.

Using Your All in One Cooker

Refer to Illustrations
1 Plug in and press the On/Off switch at
the rear of the power unit.
2 Fit the bowl. Press down lightly to
locate.
Note: the bowl cannot be located unless
fitted in the correct orientation.
To remove the bowl, push both bowl
release buttons (situated under the
bowl handles) and lift the bowl.
3 Fit the knife blade, stir tool, whisk tool
or slow cook plug to the bowl.
4 Add the relevant ingredients to be
processed or cooked.
A D
–
> WiFi > Connect
E L
–
5 Fit the lid and filler cap if required.
Push the lid down and turn anti-
clockwise until aligned with the
cooking bowl handles.
6 Set the required time, speed and
temperature.
7 Press the control dial to start the
cooking process.
8 To stop the unit at any time, press the
control dial. Take care as the bowl and
lid will be hot. To resume cooking, refit
the lid press the control dial.

Lid Off Cooking

To use the lid off cooking feature, select
a temperature and press the control dial.
The appliance will start heating.
Note:
A speed setting cannot be selected
when lid off cooking is being used.
To avoid burning, use a heat proof
utensil to stir or turn over ingredients
when necessary.

Using Preset Programmes

Refer to Illustrations
1 Select the Preset Menu.
2 Choose the preset you wish to use.
3 Follow the instructions on the display
screen.
4 To stop the unit at any time, press the
control dial. Take care as the bowl and
lid will be hot.
After Cooking
Be careful when handling or touching
any part of the appliance when being
used in the cooking mode or after
cooking, IN PARTICULAR THE BOWL
AND TOOLS as they will remain HOT
long after the appliance has been
switched off.
Use the two side handles to remove
and carry the bowl. Use oven gloves
when handling the hot bowl and hot
tools.
Do not use the pouring handle to
remove or carry the bowl.
9
M
O
–