Electrical Connections - FAAC TM2 58 Manual De Instrucciones

Translation of the original instructions

ELECTRICAL CONNECTIONS

- To prevent any danger or malfunction, the size of electrical control components
connected to the motor must be compatible with the electrical features of the
motor.
- Means for disconnection must be incorporated in the fixed wiring in accordance
with the national installation standards.
- The selectors inverting the direction of rotation of the motor must be provided
with mechanical interloc king.
- Invert the brown and the black conductor to change the direction of rotation.
- NEVER connect two or more motors to the same selector (parallel connection).
If you couple two motors, use multi-poles selectors only.
- NEVER connect two or more selectors to the same motor.
- For outdoor use, provide the appliance with a supply cable with designation
H05RN-F containing at least 2% of carbon.
TM2 7 A4516_6G24_Rev.A