Safety According To Eu Directives; Installation And Operation In The Usa And Canada; Product Description; Configuration - SICK LFC Manual De Instrucciones

Ocultar thumbs Ver también para LFC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 Product description

For safety and warranty reasons, any invasive
work on the device beyond that described in the
operating instructions manual may be carried
out only by personnel authorised by the manu-
facturer. Arbitrary conversions or modifications
are explicitly forbidden. For safety reasons, only
the accessory specified by the manufacturer
must be used.
To avoid any danger, the safety approval mar-
kings and safety tips on the device must also be
observed.
2.5
Safety according to EU
directives
The device fulfils the legal requirements of the
applicable EU directives. By affixing the CE
marking, we confirm the conformity of the instru-
ment with these directives.
The EU conformity declaration can be found on
our homepage.
Electromagnetic compatibility
The instruments are designed for use in an
industrial environment. Nevertheless, electro-
magnetic interference from electrical conduc-
tors and radiated emissions must be taken into
account, as is usual with a class A instrument
according to EN 61326-1.
When the device is mounted in metal con-
tainers or tubes, the interference resistance
requirements of IEC/EN 61326 for "Industrial
environment" and the NAMUR recommendation
EMC (NE21) are met.
If the device is to be used in other environ-
ments, the electromagnetic compatibility to
other devices must be ensured by suitable
measures.
2.6
Installation and operation in
the USA and Canada
This information is only valid for USA and Cana-
da. Hence the following text is only available in
the English language.
Installations in the US shall comply with the
relevant requirements of the National Electrical
Code (ANSI/NFPA 70).
Installations in Canada shall comply with the
relevant requirements of the Canadian Electrical
Code
18
A Class 2 power supply unit has to be used for
the installation in the USA and Canada.
3
Product description
3.1

Configuration

Scope of delivery
The scope of delivery encompasses:
LFC point level switch
Information sheet "Documents and soft-
ware" with:
– Instrument serial number
– QR code with link for direct scanning
Note:
Optional instrument features are also
described in this operating instructions
manual. The respective scope of delivery
results from the order specification.
Scope of this operating instructions
This operating instructions manual applies to
the following instrument versions:
Hardware version from 1.0.0
Software version from 1.0.0
Constituent parts
The LFC consists of the components:
Housing with integrated electronics
Process fitting
Plug
Abb. 11: LFC
1
Plug connection
2
LED illuminated ring
3
Instrument housing
4
Process fitting
5
Sensor
Type label
You will find the type plate on the sensor
housing.
The type label contains the most important data
for identification and use of the instrument.
1
2
3
4
5
LFC • Transistor (PNP)

Publicidad

Tabla de contenido
loading

Tabla de contenido