Automatic Mode - FAAC TM2 E Manual Del Usuario

INSTRUCTIONS FOR USE
N.B. Until the positions of both limit stops have been memorised, at the start of each
movement the motor will carry out a short rotation and then stop before starting
again normally.

AUTOMATIC MODE

The motor is simple to install and easy to use, it does not need to be adjusted as it
automatically recognises the limit stops.
The roller shutter must be fitted with:
A - Rigid straps or anti-burglary springs
B - Fixed or removable safety plugs in the guides
It is recommended that you always check the strength of the shutter.
A
B
After a few opening and closing movements, the positions of the limit stops will
be memorised automatically.
TM2 E 14 A4516_6J97_Rev.A