GE 26925 Guia Del Usuario página 26

T
ROUBLESHOOTING
Problem
Range is shorter
than normal
Battery will not hold a
charge OR is fully charged
and the BAT LOW lights
BAT LOW indicator stays on • Charge battery for 12 hours.
Memory Dialing
doesn't work
Unit locks up
no link between
the base and
the handset
26
G
UIDE
Solution
• Press the CHAN button during the conversation to select a
new channel.
• Position the base antenna upward.
• Be sure you are sufficiently charging the battery. When the
battery has been charged for 12 hours, you can expect
approximately 4 hours of talk time.
• Check to be sure battery contacts on both the handset and
the base are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, check that the base
CHARGE indicator is on.
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure T/P switch is correctly set.
• If the phone still does not work, disconnect the power cord
and remove the battery pack. Then reconnect the power cord
and reinstall the battery pack. Place handset in the base for
20 seconds to allow it to reinitialize.
• If a power outage occurs while the handset is away from the
base, the handset must be returned to the base when the
power returns.
(
CONTINUED
)