Siemens SIMATIC S7-1500 Manual Del Usuario página 18

SIMATIC IPC627D / IPC827D / IPC677D
If you are using a SIMATIC Box PC supported by the CPU, note the following reference information for your device:
Hardware version
BIOS version
Graphics driver
LED use
NVRAM use
Using onboard interfaces for PROFINET or PROFIBUS:
PN / IE (LAN) X1
PN / IE (LAN) X2
PROFINET (LAN) X3
(CP 1616 onboard)
MPI / DP X4
(CP 5622 onboard)
BIOS setting
The following hardware configurations of the SIMATIC Box PCs are not supported by the CPU:
● RAM < 4 GB.
● Enabled onboard RAID.
Special features in case of failsafe
The CPU 1507S F needs NVRAM for operation. To use the CPU 1507S F on these IPCs, the following options are available
under "Processor" during configuration:
● Options with onboard "PROFIBUS DP/MPI (CP 5622 compatible); 2 MB buffered SRAM"
● Options with onboard "PROFINET (IRT, 3 ports, CP 1616 compatible); 2 MB buffered SRAM"
18
Property
SIMATIC IPC 627D: FS ≥ AG
SIMATIC IPC 827D: FS ≥ AF
SIMATIC IPC 677D: FS ≥ AJ
V19.02.10
Version for Windows 7:
32-bit: 15.36.18.4156
•
64-bit: 15.36.18.64.4156
•
Version for Windows 10:
15.40.36.64.4703
•
Available on supplied USB flash drive with
version 12/2017
Supported
Supported, 35 KB can be used
Not supported
Yes
Not supported
Yes, as of FW V1.03.08.046.
Wake up on LAN
Notes
The hardware version can be found on the
rating plate of your SIMATIC IPC.
Only this graphics driver supports the "Windows
Reboot" functionality.
If you did not receive a USB flash drive with the
SIMATIC IPC, contact Customer Support.
For availability of the FW see SIMATIC Product
Information
(https://support.industry.siemens.com/cs/ww/en/
view/92275417)
Activate the "Wake up on LAN" option in the
BIOS
Add-ons to CPU 1505SP (F/T/TF), CPU 1507S (F) Version 2.5
A5E44368019-AA, 04/2018