Nice 1010GSM Instrucciones Y Advertencias Para La Instalación Y El Uso página 68

Command: *DXX
Function:
Deactivates the output relay.
Parameter: Number of input from 01 to 02.
• Para comando utilizando número já cadastrado
Exemplo:
For deactivation of the output 1, send the following command:
*D01
• Para comando utilizando senha
Example:
For deactivation of the of the output 1, sample password 0000:
?0000*D01
Command: *PXX
Function: Pulses the output relay.
Parameter: Number of input from 01 to 02.
• For command using a number already registered
Example: For pulsation of the output 1, send the following command:
• For command using the password
Example: For pulsation of the output 1, sample password
Command: *ON
Function:
Actuates all output relays.
Parameter: None.
• For command using a number already registered
Example: For the actuation of all outputs, send the following command: *ON
• For command using the password
Example: For the actuation of all outputs, sample password 0000: ?0000*ON
68
_ENGLISH
*P01
0000: ?0000*P01