Operation (continued)
4
Reading the indicator light
□
The indicator light is located below the motion
sensor (C), and shows the basic status of the
light.
□
If the indicator light flashes RED twice, the
sensor is detecting motion. This is an indication
that the motion sensor is working, even if the
LED light heads are not activating.
□
If the indicator light is GREEN, the batteries are
charging. This is an indication that the batteries
are not depleted, and the transfer of solar energy
to the rechargeable batteries is working.
5
Adjusting the light timer
NOTE: The TIME dial controls the amount of time the
light (B) will stay on full brightness after motion has been
detected. The timer is adjustable from 30 to 90 seconds.
□
To increase the time, turn the TIME dial towards
the 90 second position.
□
To decrease the time, turn the TIME dial towards
the 30 second position.
12
C