Installing The Mounting Plate; Mounting The Light Fixture - Defiant DFI-0553-WH Guía De Uso Y Cuidado

Installation (continued)
3

Installing the mounting plate

NOTE: Make sure there is enough vertical space above
the mounting plate to allow the light fixture to be mounted.
NOTE: Make sure there is enough space on the left and
right sides of the mounting plate to position and slide on
the light.
Place the mounting plate (AA) against the mounting
surface and ensure the mounting plate (AA) is level.
Mark the hole locations on the mounting surface,
through which the mounting screws (CC) will be
threaded.
□
If mounting to a wooden surface, drill two 3/32
in. holes into the mounting surface. Install the
two mounting screws (CC) through the mounting
plate (AA) and into the mounting surface.
□
If mounting to wall board or brick, drill two 7/32
in. holes into the mounting surface. Insert the
wall anchors (DD) and attach the mounting plate
(AA) using the two mounting screws (CC).
AA
CC
DD
4

Mounting the light fixture

□
Slide the rear of the light fixture (B) onto the
mounting plate (AA) from either the left or right
side. Make sure the sides of the mounting plate
are flush with the sides of the rear of the light
fixture (B).
□
Secure the fixture in place on the mounting plate
using the mounting bolts (EE). Insert mounting
bolts (EE) through the left and right sides of the
light, and into the mounting plate (AA) in the
back.
EE
8
AA
B
AA
B