Sauder Carson Forge Serie Manual Del Usuario página 12

Step 7
First, fi ll the holes in one edge of the UPPER LEFT END (B) 1/4
å
to 1/2 full with GLUE (177M). Then, insert the WOOD
DOWELS (15F) into the holes. Wipe away the excess GLUE.
Repeat adding GLUE and inserting the WOOD DOWELS in
å
the short edges of the LOWER LEFT END (C) and BRACE (I)
as shown below.
Now, fasten the BRACE (I) to UPPER LEFT END (B). Use two
å
SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Edge with HIDDEN CAMS
15F
Page 12
SILVER 1-1/8" FLAT HEAD SCREW
(2 used in this step)
I
B
The holes should be
closer to this edge.
10S
C
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
15F