Sauder Carson Forge Serie Manual Del Usuario página 26

Step 19
1
BLACK 1-9/16" FLAT HEAD SCREW
Surface without hole
D113
M71
Groove
å Fasten the PENCIL DRAWER SIDES (D113) and
DRAWER BRACE (M71) to one of the PENCIL DRAWER
BOX FRONTS (D574). Use fi ve BLACK 1-9/16" FLAT
HEAD SCREWS (30S).
3
D574
D113
M71
Fasten the remaining PENCIL DRAWER BOX
å
FRONT (D574) to the PENCIL DRAWER SIDES (D113)
and DRAWER BRACE (M71).
HEAD SCREWS (30S).
Page 26
30S
(10 used in this step)
Hidden part using
recycled material.
D574
Color may vary.
D113
Start each screw a few
turns before completely
30S tightening any of them.
Be sure the
DRAWER
D113
BOTTOM
inserts into
the DRAWER
BOX groove.
Use fi ve BLACK 1-9/16" FLAT
2
U n fi
B59
D113
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BOX groove.
Slide the LARGE DRAWER BOTTOM (B59) into the
å
grooves in the PENCIL DRAWER SIDES (D113) and
PENCIL DRAWER BOX FRONT (D574).
4
D574
R3
Fasten the PENCIL DRAWER FRONT (R3) to the PENCIL
å
DRAWER BOX FRONT (D574). Use three BLACK 7/8"
LARGE HEAD SCREWS (17S).
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
n i s h
e d
s u r
f a c
e
D113
D574
17S
BLACK 7/8" LARGE HEAD SCREW
(3 used for the DRAWER FRONT)