Sauder Carson Forge Serie Manual Del Usuario página 13

Step 8
First, fi ll the four holes in the edge of the LEFT REAR LEG (X)
å
1/4 to 1/2 full with GLUE (177M). Then, insert the WOOD
DOWELS in the ENDS (B and C) and BRACE (I) into the holes of
the LEG. Wipe away the excess GLUE.
NOTE: Be sure the CAM SCREWS insert into the holes in the
å
short edges of the LOWER LEFT END (C) and BRACE (I).
Fasten the LEFT REAR LEG (X) to the LOWER LEFT END (C)
å
and BRACE (I). Tighten two HIDDEN CAMS.
Repeat this step for the LEFT FRONT LEG (V) making sure all
å
HIDDEN CAMS are tight.
I
B
V
X
Angled edge
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Angled edge
C
Page 13