6.7. Emergency situations
WARNING: in every emergency situation, to shut down the ma-
chine, rmly press the main switch into position -0-.
In case of freezing, switch off the machine and contact a service center or
specialized technician.
If a re breaks out, the area must be immediately cleared to
make way for trained personnel provided with suitable safety
equipment. Always use approved extinguishers, never use wa-
ter or substances of dubious nature.
6.8. Optionals
6.8.1 Timer
The timer shown is given as an indication only.
The timer must be set while the main switch is positioned on
-0- and the machine is unplugged.
Fig.23
6.8.1.1 Setting the current time
Before you start using the timer you must set the current date and time.
To set, turn the timer dial in the direction indicated by the arrow until the indi-
cator (A)
current time
Do not:
turn the pointer using a tool;
turn the pointer in the direction opposite that shown in
the timer.
6.8.1.2 Operating the machine with the timer
In all machines equipped with a timer, the user must check that
the selector (B) is in the central position
The machine must be started as shown in section 6.2.
- 12 _EN -
A
B
C
(C) until reaching the
.
Switch
in position "I":
- to obtain granita position the timer lever in position
- to obtain cold drinks position the timer lever in position
sired date and time.
Switch
in position "II":
the timer is off and the machine works as a beverage cooler only.
6.8.2 Mechanical thermostat
It is possible to regulate the temperature of machines provided with a mechani-
cal thermostat, when they operate in "cold drink" mode. To do so, simply adjust
the refrigeration power using the potentiometer. To obtain a higher refrigeration
power (lower product temperature) turn it clockwise towards higher power va-
lues.
Fig.24
on the desired
on the de-
SL310006542 Ed.02 - 07-2017