Cleaning And Maintenance; Emptying The Bowls - horeca Granitore 1 Manual De Empleo

7. CLEANING AND MAINTENANCE

Before undertaking any cleaning and maintenance of external
machine components, make sure that the main switch is posi-
tioned on -0- and that the machine is unplugged.
Before performing any cleaning and maintenance operation on
the machine, wear the personal protections (gloves, glasses,
etc.), which are recommended by the safety standards in force
in the country where the machine is used.
When performing the Cleaning and Maintenance operations, follow these in-
structions:
forming to current regulations in the user's country) that will not risk damag-
have been removed or opened are set back in place and properly secured.
Cleaning and sanitization are operations that must be performed with utmost
care and on a regular basis to guarantee the quality of the beverages dispensed
and compliance with mandatory hygiene standards.
The bowl must be cleaned and sanitized at least once a day and
in any case, in compliance with the current hygiene regulations
in the country of use. These operations need to be performed
more frequently if demanded by the characteristics of the product used;
for more details, contact the product supplier. If the machine is not used
continuously throughout the day, wipe the dispensing tap area and the
product outlet pipe with a clean cloth and sanitizing uid, as illustrated
in the gure below.
Fig.27
The stainless materials, plastic and rubber used to manufacture
said parts, as well as their particular shape, make them easy to
clean but do not prevent the build-up of germs and mold in the
event of inadequate cleaning.
It is forbidden to clean or service the machine when it is plugged
in and the main switch is positioned on -1- .
- 14 _EN -

7.1. Emptying the bowls

Before a bowl may be cleaned, it must be emptied of the previously prepared
product.
If the bowl is to be cleaned prior to the rst use of the machine, it need not
be emptied. In such a case refer directly to section 7.2.
to operate the other bowls simply carry out the same sequence of steps on the
switches of the bowl in question.
With the machine switched on, put the freeze/cool changeover switch
"O", and empty the bowl of all its contents.
-
Fig.28
-
PRODUCT
After that, put off both the main switch and mixer switch and unplug the ma-
chine.
Fig.29
SL310006542 Ed.02 - 07-2017
on