Sauder Carson Forge 420422 Instrucciones De Instalación página 22

Step 18
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R).
å
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A and B). Set the ADJUSTABLE SHELF (H) onto the
METAL PINS.
To insert the PULL-OUT SHELF into your unit, line up the
å
EXTENSION SLIDES on the SHELF with the EXTENSION
RAILS on the unit and push the SHELF into the unit until the
SHELF is fully inserted. The SHELF will push in hard until it is
all the way in, then it will slide in and out easier.
Page 22
B
420422
If you're doing this to
help a friend, don't
leave without a bite.
A
H
1R
(4 used)
2R
www.sauder.com/services