Prodigy AutoCode Manual Del Proprietário página 27

AutoCode Blood Glucose Meter
®
STEP 11: Delete Memory
When the "dEL" and flashing " " symbols appear on
the display, you can choose to clear the memory. If you
do not want to clear the memory, press the "SET" but-
ton to skip this step.
If you want to clear ALL memory,
press the "M" button for four (4)
seconds. See Figure 16.
"OK" will appear to show that all
memory has been deleted.
Figure 16
Setup is now complete. "OFF" will
display and the meter will turn off.
See Figure 17.
Figure 17
Owner's Manual
27