Viewing Results On A Personal Computer - Prodigy AutoCode Manual Del Proprietário

Each time you press and release the
"M" button, the meter will recall up
to your last 450 test results in order.
When the memory is full, the oldest
test result will be deleted and the
newest will be added. After reaching
the last individual result, press the
"M" button and the meter will turn
off.
STEP 4: Exit the Memory Mode
At any point, you may press and hold the "M" button for
four (4) seconds to exit memory mode.
Voice Speaks: "Please insert the test strip."
Important: If no buttons are pressed for one (1)
minute, the meter will display "OFF" and turn off
automatically.

Viewing Results on a Personal Computer

Test results in your meter's memory can be transmitted
to your personal computer. Please visit the Prodigy web-
site, www.prodigymeter.com, for more information.
AutoCode
®
Owner's Manual
Blood Glucose Meter
Figure 38
47