Prodigy AutoCode Manual Del Proprietário página 33

AutoCode Blood Glucose Meter
®
Figure 19 Figure 20
STEP 5: Check if the Test Result is in Range.
After the meter counts down from 6 to 1, the control solu-
tion test result will appear on the display. Compare this
test result with the range (Low-Level 1 or High-Level 2)
on the back of the test strip vial.
The control range can change
with each new vial of test strips.
Always use the control solution
range on the label of your cur-
rent vial of Prodigy No Coding
Blood Glucose Test Strips. The
result should fall within the print-
ed range on the test strip vial.
Figure 21
See Figure 21.
Owner's Manual
33