Securing Your Child in the Vehicle
Place booster firmly against the back of a
22
forward-facing vehicle seat equipped with a
lap/shoulder belt only. Have your child sit in booster
with their back flat against back of vehicle seat.
The lap belt portion MUST pass under the
23
armrests and be positioned low on the hips.
The shoulder belt MUST lie across child's
24
shoulders in
lies outside this zone, the booster cushion can
be pushed along the vehicle seat to help achieve
a better fit and if necessary, the shoulder belt
positioning clip MUST be used.
Shoulder Belt Positioning Clip
To attach the Clip to the Booster Seat:
The shoulder belt positioning clip MUST be
25
attached onto the horizontal bar in the centre
of the base. Insert the loop end of strap around
horizontal bar on rear of seat as shown.
Pass the clip and strap through the loop end as
26
shown and pull strap up through slot in seat pad.
NOTE: Free end of strap should face front of seat.
27
Slide the vehicle shoulder belt onto the clip as
shown in and pull strap down to tighten clip against
child's shoulder.
The lap belt portion MUST pass under the
28
armrests and be positioned low on the hips.
The belt MUST NOT be twisted.
Rear view of child sitting in seat. Align the tail
29
under the strap.
red zone
as shown. If shoulder belt
15