Setting instructions
The time-setting crown (I) can be placed in three positions A, B
and C.
Setting the time:
A: Pushed against the case.
This is the normal position when the watch is being worn and
guarantees its water-resistance.
C: Time-setting position.
When the crown (I) is unscrewed and pulled out to this position,
the time can be set. Push the crown (I) back to position A once
the time has been set.
Setting the date (calendar):
B: Date-setting position (calendar).
When the crown (I) is unscrewed and pulled out to this position,
turning it anti-clockwise allows you to set the date (4). Then
push the crown (I) back to position A so the watch can continue
to operate.
Water-resistance
The water-resistance of the watch has been tested at a pressure
of 5 bar.
14
Replacing the battery
To avoid the watch stopping in an untimely fashion, it is
recommended to replace the battery every 2 or 3 years.
Preventative maintenance servicing is recommended every 6 or
7 years.
Only operations carried out by the Vacheron Constantin service
network guarantee quality work equivalent to that carried out
during the watch's manufacture.
Environment
Your quartz Vacheron Constantin watch contains a battery and
electronic components. If replaced, the Vacheron Constantin
service network will recover such components and ensure they
are disposed of in accordance with the standards in force.
15